This page is for gas engineers, plumbers and heating contractors, and for the small firms and site managers who hire them, who want a gas RAMS (risk assessment and method statement) for domestic gas work. HSE's starting point is that anyone working on domestic gas appliances must be Gas Safe registered and competent in that specific area, and that carbon monoxide is the central hazard. The page sets out common hazards, the controls HSE describes, a short method outline and answers to common questions. It is a starting point to adapt to the job, the premises and the appliances involved.
Based on HSE — Domestic gas: frequently asked questions, read 2026-11-03. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.
Hazards and controls
| Hazard | Who is at risk | Controls |
|---|---|---|
| Carbon monoxide poisoning | Occupants, tenants, people sleeping in rooms with gas appliances, engineers | HSE describes CO as colourless, odourless, tasteless and poisonous, produced by incomplete burning. Controls include annual servicing by a Gas Safe registered engineer, clear flues, unblocked ventilation and CO alarms to BS EN 50291 as a supplement to maintenance. |
| Unregistered or incompetent gas work | Occupants, landlords, engineers | Anyone working on domestic gas appliances must be Gas Safe registered and competent in the specific area. Engineers carry ID cards showing their qualifications, and registration can be checked online, by phone or by text before work starts. |
| Blocked flues and poor ventilation | Occupants, engineers | Flues are kept clear, ventilation is never blocked and appliances get enough air. Warning signs of incomplete combustion include yellow or orange flames, soot or staining, pilot lights that often go out and increased condensation inside windows. |
| Appliances in bedrooms | Occupants sleeping in rooms with gas appliances | Appliances over 14 kW need to be room-sealed. Smaller appliances and instantaneous water heaters need room-sealing or an atmosphere-sensing device. Older bedroom installations need a risk assessment. |
| Unsafe appliance left in use | Occupants, tenants, later engineers | It is illegal to use an appliance suspected to be unsafe. It is turned off and left alone until a Gas Safe engineer has checked it. Under the GIUSP, 'at risk' and 'immediately dangerous' appliances carry a 'Danger Do Not Use' label. |
| Gas escape | Occupants, neighbours, engineers | On smelling gas, HSE's advice is to call the National Gas Emergency line on 0800 111 999, open doors and windows, and shut off the gas at the meter control valve if its location is known. |
| Missing safety check records | Tenants, landlords | Landlords keep safety check records for 2 years and give copies to tenants within 28 days, or before a new tenant moves in. Electronic records are allowed if they can be reproduced in hard copy, are secure and identify the engineer. |
Method statement — sequence of work
- Confirm the engineer is Gas Safe registered for the type of work and carries an ID card, and note the registration check on the job record.
- Assess the premises before starting: the appliances, flues, ventilation and any bedroom installations, and look for signs of incomplete combustion such as soot, staining or yellow or orange flames.
- Carry out the work within the engineer's competence, keeping flues clear and ventilation open, and label any unsafe appliance 'Danger Do Not Use' under the GIUSP, leaving it switched off.
- Record the work and any safety checks, and note the emergency steps for a gas smell or suspected CO exposure, including the National Gas Emergency number 0800 111 999.
What to include in the written assessment
- Site address, the task, the date and who carried out the assessment.
- Each hazard above with the people at risk, the controls in place and the residual risk rating.
- The equipment, PPE and competence (training, cards) the controls depend on.
- Emergency and rescue arrangements, first aid and the nearest A&E.
- A review date and a signature line for the person in charge and the operatives who have read it.
For self-employed gas engineers, the business side matters too, starting with who needs to do a Self Assessment, which explains the general rules in plain terms.
Get the document
Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.
Questions
Who has to be Gas Safe registered for domestic gas work?
HSE states that anyone working on domestic gas appliances must be Gas Safe registered and competent in that specific area. Engineers carry ID cards showing their qualifications. Registration can be checked online, by calling 0800 408 5500, or by texting 'Gas' and the licence number to 85080. Compressed natural gas refuelling work is the exception, though workers still need to be trained and competent.
How often are gas appliances checked in rented homes?
HSE says appliances, flues and pipework should be installed, maintained and serviced by a Gas Safe registered engineer, with safety checks at least every 12 months. Landlords keep the check records for 2 years and give tenants a copy within 28 days, or before a new tenant moves in. In England, landlords also provide CO alarms in rooms with fixed combustion appliances, excluding gas cookers.
Need the finished document, not just the guide?
Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.
Build my RAMS — £19Also as editable Word files, £9 each: Method statement template · Health and safety policy template.