Ladders are not banned, but HSE expects them to be used only where the risk assessment shows that equipment with more fall protection is not justified. Once a ladder is the right choice, the risk assessment has to show how the ladder will be used safely — and most of HSE's precautions are simple: don't overreach, get the angle right, keep three points of contact and stop the ladder moving. This page sets out the hazards and controls for leaning ladders, telescopic ladders and stepladders.
Based on HSE — Types of ladder and using them safely, read 2026-10-19. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.
Hazards and controls
| Hazard | Who is at risk | Controls |
|---|---|---|
| Overreaching and overbalancing | Ladder user | Belt buckle (or navel) kept within the stiles; the ladder moved rather than stretching; only light materials and tools carried, checked against the manufacturer's labels. |
| Ladder slipping at the base or top | Ladder user | 1-in-4 rule for leaning ladders (one out for every four up, a 75° angle); ladder tied to stop it slipping outwards or sideways; a strong upper resting point, never glazing or plastic gutters; an effective stability device where suitable. |
| Working from the top of the ladder | Ladder user | No work off the top three rungs; the ladder extends at least 1 metre or three rungs above where you are working; stepladders not used on the top three steps unless there is a suitable handhold. |
| Unstable footing | Ladder user | Never stood on movable objects such as pallets, bricks, lift trucks, tower scaffolds, excavator buckets, vans or MEWPs; all four stepladder feet in contact with the ground and the steps level. |
| Losing grip while climbing | Ladder user | Face the rungs and grip the ladder when climbing or descending; tools carried in a tool belt; three points of contact maintained — other measures needed where a handhold cannot be kept for more than a brief moment. |
| Overhead power lines and electrical work | Ladder user | No work within 6 m horizontally of an overhead power line unless it is dead or protected with insulation; non-conductive (fibreglass or timber) ladder for electrical work. |
| Telescopic ladder failure and trapped fingers | Ladder user | Manufacturer's instructions followed; every section's locking mechanism checked before each use; care when closing; not used if in any doubt. |
Method statement — sequence of work
- Task assessed first: is a ladder justified, or does the work need a tower, podium or MEWP? Ladder type chosen for the task.
- Pre-use check of stiles, feet, rungs and locking mechanisms; labels and pictograms read.
- Ladder set at 1-in-4, secured by tying or a stability device, extending above the work point; clear of power lines.
- User keeps three points of contact, does not overreach and does not move or extend the ladder while standing on it; work stops if conditions change.
What to include in the written assessment
- Site address, the task, the date and who carried out the assessment.
- Each hazard above with the people at risk, the controls in place and the residual risk rating.
- The equipment, PPE and competence (training, cards) the controls depend on.
- Emergency and rescue arrangements, first aid and the nearest A&E.
- A review date and a signature line for the person in charge and the operatives who have read it.
Plenty of ladder work is done by people who have just gone self-employed, and they can check whether they need to file a self assessment return once they start trading.
Get the document
Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.
Questions
What is the correct angle for a leaning ladder?
HSE's 1-in-4 rule: one unit out from the wall for every four units up, which gives a 75° angle.
Can I work from the top of a stepladder?
HSE says don't stand and work on the top three steps, including a step forming the very top, unless there is a suitable handhold. Position the stepladder to face the work rather than side on where possible.
Need the finished document, not just the guide?
Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.
Build my RAMS — £19Also as editable Word files, £9 each: Method statement template · Health and safety policy template.