Machinery risk assessment

This page is for employers, tradespeople and small workshop owners who run machinery such as saws, presses, conveyors or mixers and want a clear way to think through the risks. HSE's starting point is to consider the likely risks before anyone uses a machine, and to check that it is complete, has its safeguards fitted and is free from defects. The sections below cover the main machinery hazards, who they affect, the controls HSE describes in order of priority, a short method for writing the assessment up, and answers to common questions. Treat it as a starting point and adapt it to your own machines and work.

Based on HSE — Introduction to machinery safety, read 2026-11-12. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.

Hazards and controls

HazardWho is at riskControls
Entrapment in rollers, belts and pulley drivesOperators, cleaners and maintenance workersBody parts can be drawn in or trapped. HSE puts fixed guards first, secured with screws, nuts or bolts, using suitable materials and mesh with holes too small to reach moving parts.
Striking and ejectionOperators and anyone nearbyPeople can be hit by moving parts or by material thrown from a machine. Guarding, correct set-up and siting machines so passers-by, customers or visitors are not exposed all reduce the risk.
Cutting, severing and punctureOperators, especially new or inexperienced staffSharp edges can cut or sever and sharp points can stab. Where fixed guards are impractical, HSE describes interlocked guards, trip systems, and jigs, holders or push sticks, backed by training and supervision.
Crushing and shearingOperators and maintenance workersPeople can be crushed between moving parts, or against fixed parts, walls or objects, and shearing occurs where two parts pass each other. Guards, interlocks and checking that nip guards stay in place after modifications are key controls.
Burns and scaldsOperators and cleanersHot or cold parts, materials or emissions such as steam or water can cause injury. The assessment looks at what can be touched or released, with guarding and the right protective equipment as controls.
Electric shock and burns, and other power suppliesOperators and maintenance workersHSE says risks from electrical, hydraulic or pneumatic power supplies are identified and managed. Changes to programmable electronic systems are made by a competent person, with records kept and changes checked.
Clearing blockages, cleaning, adjusting and maintenanceOperators, cleaners and maintenance workersHSE describes isolating, switching off or locking off the machine before clearing blockages, cleaning or adjusting it. A safe system of work covers use and maintenance, including any residual risks the supplier has declared.

Method statement — sequence of work

  1. List the machines and, for each, every task around it: set-up, normal use, clearing blockages, cleaning, breakdown repairs and planned maintenance.
  2. Note the hazards at each task, such as entrapment, ejection, cutting, crushing, burns and electric shock, and who could be harmed, including new starters, young people and visitors.
  3. Record the controls in HSE's order: fixed guards, interlocks or trip systems, jigs or push sticks, then information, instruction, training and supervision, and note the supplier's residual risks.
  4. Check safeguards work in practice, ask why workers bypass any that are inconvenient, record the findings, and revisit the assessment after modifications, faults or incidents.

What to include in the written assessment

Running a trade also means keeping records and understanding tax, including who needs to do a Self Assessment, which is general education worth reading alongside your safety paperwork.

Get the document

Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.

Questions

What does HSE expect in a machinery risk assessment?

HSE's starting point is to think about the likely risks before anyone uses a machine, check it is complete with all safeguards fitted and free from defects, and put a safe system of work in place covering use and maintenance. Residual risks the supplier has declared are included in that system.

Which guards does HSE prefer?

HSE sets out an order of priority. Fixed guards come first wherever practical. Where they are impractical, interlocking or trip systems are described. Jigs, holders or push sticks come next where guards cannot give full protection. Information, instruction, training and supervision deal with whatever risk remains.

Need the finished document, not just the guide?

Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.

Build my RAMS — £19

Also as editable Word files, £9 each: Method statement template · Health and safety policy template.