This page is for tradespeople and small businesses who want a short check made at the place of work, just before a job starts, alongside the main risk assessment. HSE's guidance on managing risk is the starting point: identify the hazards, assess the risks, control them, record the findings and review the controls. The page sets out common hazards and controls drawn from that guidance, a four-step method to adapt on site, and answers to common questions. It is general information and a starting point for the reader to adapt to the job in hand, not a finished assessment.
Based on HSE — Risk assessment: Steps needed to manage risk, read 2026-11-06. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.
Hazards and controls
| Hazard | Who is at risk | Controls |
|---|---|---|
| Non-routine work such as maintenance or cleaning | Workers and contractors | HSE asks for non-routine work to be considered when identifying hazards. Controls include reorganising the work to reduce exposure, practical safe-working measures, and checking before starting whether the usual controls still fit the task. |
| Manual handling | Workers lifting or carrying | HSE lists manual handling as a health hazard. Controls include redesigning the job, reorganising work to reduce exposure, and practical safe-working measures, so that harm is made unlikely rather than relying on paperwork alone. |
| Chemicals and substances | Workers and others nearby | HSE lists chemicals and substances among the hazards to identify. Controls start with asking whether a substance can be removed or replaced, then reorganising work to reduce exposure and providing personal protective equipment that workers actually wear. |
| Plant and equipment in use | Operators and others nearby | How plant and equipment are used is part of identifying hazards. Controls HSE describes include replacing machinery or processes, redesigning the job, and practical safe-working measures, with the aim of making harm unlikely. |
| Unsafe work practices | Workers and contractors | HSE asks for the way people actually work to be looked at, and for employees to be involved because they usually have useful ideas. Controls include practical safe-working measures and reorganising work, then checking they are followed. |
| General state of the premises or site | Workers, visitors and the public | The general state of the premises is part of hazard identification. Where a problem cannot be removed, controls include reorganising work to limit exposure and practical measures that also protect contractors, visitors and members of the public. |
| Work-related stress | Workers, including vulnerable workers | HSE names work-related stress as a health hazard to identify. Involving employees helps find the causes. Controls include redesigning the job and reorganising work, and reviewing them if workers report problems. |
Method statement — sequence of work
- Look around the place of work for things that may cause harm, including how people work, the equipment and substances in use, the state of the premises and any non-routine tasks, and ask the people doing the job for their ideas.
- Decide who might be harmed and how, including contractors, visitors, the public and vulnerable workers such as young workers, new or expectant mothers and people with disabilities, and note how likely and how serious the harm could be.
- Ask whether each hazard can be removed altogether; if not, choose controls that make harm unlikely, such as redesigning the job, replacing materials or equipment, reorganising work, practical safe-working measures and personal protective equipment.
- Record the significant findings, then review the controls if the job changes, workers report problems or there is an accident or near miss, and update the record to match.
What to include in the written assessment
- Site address, the task, the date and who carried out the assessment.
- Each hazard above with the people at risk, the controls in place and the residual risk rating.
- The equipment, PPE and competence (training, cards) the controls depend on.
- Emergency and rescue arrangements, first aid and the nearest A&E.
- A review date and a signature line for the person in charge and the operatives who have read it.
Safety paperwork is one side of running a trade, and the tax side starts with understanding who needs to do a Self Assessment, which is general education only.
Get the document
Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.
Questions
Do I have to write down a risk assessment?
HSE's guidance says that an employer with 5 or more people must record the significant findings: the hazards, who might be harmed and how, and what is being done to control the risks. HSE also cautions against relying on paperwork alone, since controlling the risk in practice is the priority.
When should a risk assessment be reviewed?
HSE's guidance says controls are reviewed to check they work, and again if they may no longer be effective. Prompts include changes to staff, processes, substances or equipment that could create new risks, workers reporting problems, and accidents or near misses. The record is then updated with any changes.
Need the finished document, not just the guide?
Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.
Build my RAMS — £19Also as editable Word files, £9 each: Method statement template · Health and safety policy template.