The Provision and Use of Work Equipment Regulations 1998 (PUWER) put duties on anyone who owns, operates or has control over work equipment — any machinery, appliance, apparatus, tool or installation for use at work, including equipment employees bring in themselves — and on businesses whose employees use equipment, whether or not they own it. HSE's overview sets out what has to be in place: equipment suitable for the job, maintained and inspected, guarded, with safe controls and isolation, used only by trained people. A PUWER risk assessment checks each item against that list, and this page follows the overview.
Based on HSE — Provision and Use of Work Equipment Regulations 1998 (PUWER): overview, read 2026-10-31. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.
Hazards and controls
| Hazard | Who is at risk | Controls |
|---|---|---|
| Equipment unsuitable for the task or the conditions | Operators, others nearby | Equipment constructed or adapted for the purpose, selected with the working conditions and the workplace risks in mind, and used only for suitable operations. |
| Equipment in poor repair | Operators | Equipment kept in an efficient state, in working order and in good repair; any maintenance log kept up to date; maintenance done safely with the equipment shut down. |
| Faults undetected where safety depends on installation or conditions | Operators, others nearby | Inspection after installation and before first use where safety depends on how the equipment is installed; inspection at suitable intervals for equipment exposed to deteriorating conditions, so faults are found in good time. |
| Access to dangerous parts of machinery | Operators | Access to dangerous parts prevented, normally by fixed guards; interlocked guards where routine access is needed; where guarding is not practicable — a circular saw blade is HSE's example — the danger protected as far as possible and a safe system of work used; falling or ejected parts, rupture and very hot or cold parts also controlled. |
| Unclear controls and no way to isolate power | Operators, maintenance staff | Starting, stopping and control devices clearly identified and control systems safe; equipment isolable from all sources of power — electrical, hydraulic, pneumatic and gravitational — where appropriate. |
| Equipment that could move or overturn | Operators | Equipment stabilised, for example by clamping; mobile equipment carrying people suitable for that purpose, with rollover risk minimised and a suitable restraint and rollover protection; self-propelled equipment with brakes, adequate driver vision and lighting where necessary. |
| Untrained or unauthorised users | Operators, supervisors | Adequate training on correct use, the risks and the precautions for everyone who uses, supervises or manages the equipment; equipment with specific risks, such as woodworking machinery, restricted to trained and appointed people; clear health and safety information and written instructions where needed. |
Method statement — sequence of work
- Every item of work equipment listed, including hired and employee-owned items; each checked for suitability against the task and the conditions, and new equipment checked for conformity marking, manufacturer's details, a Declaration of Conformity and English instructions.
- Maintenance and inspection arrangements set per item: maintenance log, post-installation inspection, interval inspections for equipment that deteriorates, thorough examination where the Regulations require it.
- Guards, controls, isolation and stability checked on each machine; defects corrected before use.
- Users, supervisors and managers trained and recorded; higher-risk equipment restricted to appointed people; the assessment reviewed when equipment, tasks or users change.
What to include in the written assessment
- Site address, the task, the date and who carried out the assessment.
- Each hazard above with the people at risk, the controls in place and the residual risk rating.
- The equipment, PPE and competence (training, cards) the controls depend on.
- Emergency and rescue arrangements, first aid and the nearest A&E.
- A review date and a signature line for the person in charge and the operatives who have read it.
Employers who are reviewing what their staff are paid alongside the equipment they use may find a plain guide to how salary sacrifice works useful.
Get the document
Download the free PUWER risk assessment template and checklist (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.
Questions
Does PUWER apply to tools my employees bring in themselves?
Yes. HSE's overview says work equipment includes equipment employees provide for their own use at work, and the duties fall on the business whose employees use it, whether or not the business owns it.
What does 'use' mean under PUWER?
HSE reads it broadly: it covers starting, stopping, setting, cleaning, repairing, modifying, maintaining, servicing and transporting the equipment, not just operating it.
Need the finished document, not just the guide?
Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.
Build my RAMS — £19Also as editable Word files, £9 each: Method statement template · Health and safety policy template.