This page is for small employers and tradespeople whose teams use hammer action drills, breakers, grinders, chainsaws or similar powered hand tools. HSE's starting point is that a vibration risk assessment identifies where vibration risk exists, who is affected, how much exposure they get and what needs doing about it. The page covers HSE's exposure points system, rough risk groupings by tool type, a table of typical hazards and controls, a four-step method and common questions. It is a starting point to adapt to your own tools, tasks and people, not a finished assessment.
Based on HSE — Vibration risk assessment, read 2026-11-11. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.
Hazards and controls
| Hazard | Who is at risk | Controls |
|---|---|---|
| Regular use of hammer action tools (breakers, chipping hammers) | Operators who use them regularly | HSE puts regular use of hammer action tools for more than about an hour a day in its high-risk grouping. Prioritise these users first, estimate exposure from handbook data and trigger time, and look at more suitable tools and less trigger time. |
| Rotary and other action tools (angle grinders, drills) | Employees using them for long periods | HSE groups some rotary and other action tools used for more than about one hour a day as medium risk, and more than about four hours as high risk. Estimate exposure and review the controls for effectiveness. |
| Unsuitable or poorly matched tools | Anyone using the tool for the task | HSE notes the exposure limit may be exceeded much sooner with unsuitable tools. Gather make, model, power and vibration information from handbooks, ask employees which tools feel worst, and choose more suitable equipment where possible. |
| Long trigger time | Employees who use vibrating tools regularly | Trigger time is the time the tool is vibrating and in contact with the hands. HSE says to record actual trigger time, not time on site, and notes that reducing it is useful. Compare totals with the action points. |
| Heavy tools and awkward posture | Employees holding or guiding tools | HSE suggests asking employees about problems such as tool weight and awkward posture alongside vibration. Record what they report, as it may point to a better tool choice or a different way of working. |
| Existing hand-arm vibration symptoms or particular susceptibility | Employees with symptoms in their hands or arms | HSE's assessment aims to identify employees who need health surveillance and any who are at particular risk. Ask employees and supervisors about symptoms, record what is found and add the actions to a timetabled plan. |
| Hired or supplied equipment with poor vibration information | Hirers, buyers and tool users | HSE refers to Section 6 of the Health and Safety at Work etc Act 1974, which covers suppliers and hirers, and to manufacturers supplying low-vibration equipment with clear instructions. Check the information supplied before relying on it for estimates. |
Method statement — sequence of work
- Identify likely significant hand-arm vibration risk: ask employees and supervisors which processes involve regular vibration, check equipment handbooks and ask about symptoms.
- List the vibrating equipment, the people who use it and their actual trigger times, using a competent assessor and consulting supervisors, employees and safety representatives.
- Estimate exposure from manufacturer or handbook data using HSE's exposure points table or calculator, and compare the daily total with the 100 and 400 point values, starting with the highest-risk group.
- Record the findings in an action plan with a timetable and a named person responsible, then review it when circumstances change and regularly otherwise, at least about every 2 years.
What to include in the written assessment
- Site address, the task, the date and who carried out the assessment.
- Each hazard above with the people at risk, the controls in place and the residual risk rating.
- The equipment, PPE and competence (training, cards) the controls depend on.
- Emergency and rescue arrangements, first aid and the nearest A&E.
- A review date and a signature line for the person in charge and the operatives who have read it.
Alongside the safety paperwork, many tradespeople also keep their own tax records in order, and this explains who needs to do a Self Assessment in general terms.
Get the document
Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.
Questions
What are the vibration exposure action and limit values in points?
HSE's risk assessment page gives 100 points per day as the exposure action value (EAV) and 400 points per day as the exposure limit value (ELV). Points are worked out by multiplying each tool's points per hour, taken from HSE's table, by its daily trigger time in hours, then adding the totals.
How often should a vibration risk assessment be reviewed?
HSE says to review the assessment when workplace circumstances change, and regularly otherwise. It advises not leaving it more than about 2 years without checking whether a review is needed. Changes such as new tools, new tasks or employees reporting symptoms are typical reasons to look again.
Need the finished document, not just the guide?
Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.
Build my RAMS — £19Also as editable Word files, £9 each: Method statement template · Health and safety policy template.