Workplace transport risk assessment

HSE's figures put workplace transport at over 5,000 incidents a year, around 50 of them fatal, and its introduction to the subject organises the controls under three headings: safe site, safe vehicle and safe driver. A workplace transport risk assessment starts by mapping where vehicles and people meet — including loading and unloading, infrequent jobs such as skip changes, and visiting delivery drivers who are especially vulnerable — and then works through each heading. This page follows HSE's introduction.

Based on HSE — Introduction to workplace transport safety, read 2026-10-31. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.

Hazards and controls

HazardWho is at riskControls
Pedestrians and vehicles sharing the same spacePedestrians, drivers, visitorsSeparate pedestrian and vehicle routes; one-way systems where possible; marked crossing points; separate visitor parking; vehicle and pedestrian movements mapped so the places they interact are known.
ReversingPedestrians, driversReversing minimised by site layout; reversing aids such as CCTV fitted; effective reversing alarms.
Poor lighting and uneven surfacesDrivers, pedestriansAdequate lighting; firm, even road surfaces; safe, designated loading and unloading areas.
Unsuitable or poorly maintained vehiclesDrivers, pedestriansVehicles suited to the task; brakes, steering, tyres, lights and mirrors kept in good repair.
Falls from vehicles while loading, sheeting or checkingDriversControls reachable from ground level where possible; well-built ladders, non-slip walkways and guard rails for access to the vehicle.
Rollover and unbelted occupantsDriversRollover protection fitted where appropriate; seat belts used where fitted.
Untrained or unsupervised drivers, including visitorsEveryone on siteLift truck operators trained and reassessed every three to five years or when new risks arise; other vehicle drivers trained to a similar standard; all drivers, including visitors, supervised.

Method statement — sequence of work

  1. Vehicle and pedestrian movements mapped across the whole site, including loading and unloading, infrequent tasks such as skip changes, and delivery drivers from outside the business.
  2. Safe site: routes separated, one-way systems and crossing points marked, reversing cut, lighting and surfaces checked, loading areas and visitor parking set out.
  3. Safe vehicle: suitability confirmed, maintenance schedule for brakes, steering, tyres, lights and mirrors, access and fall controls, reversing aids, rollover protection and seat belts.
  4. Safe driver: training records checked, reassessment dates set, supervision in place; the assessment reviewed after any incident or change to the site.

What to include in the written assessment

Yard and warehouse employers who are reviewing driver pay packages may want a plain explanation of how salary sacrifice works in the UK alongside it.

Get the document

Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.

Questions

How often should forklift drivers be reassessed?

HSE's introduction says lift truck operators should be reassessed every three to five years, or sooner when new risks arise — and that other vehicle drivers should be trained to a similar standard and all drivers supervised.

Do delivery drivers need to be in my workplace transport risk assessment?

Yes. HSE singles out delivery drivers as especially vulnerable because they are visiting an unfamiliar site, so the assessment should cover where they go, where they wait and how they are kept apart from site vehicles.

Need the finished document, not just the guide?

Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.

Build my RAMS — £19

Also as editable Word files, £9 each: Method statement template · Health and safety policy template.