Forklift truck risk assessment

HSE's answers on lift trucks start with the operator: employers have a legal duty to provide information, instruction, training and supervision, and anyone who has never been trained could be working in breach of the law. A forklift truck risk assessment therefore starts with the operator — trained, re-assessed, old enough and fit to drive — before it moves on to the truck, the load and the people around it. This page follows HSE's lift-truck questions and answers and sets out the controls.

Based on HSE — Lift trucks: frequently asked questions, read 2026-10-19. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.

Hazards and controls

HazardWho is at riskControls
Untrained operatorsOperators, pedestriansNobody operates a lift truck without basic training to the standard in the ACOP Rider-operated lift trucks: operator training and safe use — even occasional users; the employer's duties under PUWER 1998 and the Management Regulations 1999 cover this.
Skills drifting over timeOperators, others nearbyOperators re-assessed from time to time: after a long break, for occasional users, after an accident or near miss, where unsafe habits appear, or when the work or environment changes.
Young or unfit operatorsOperators, others nearbyOperators over the minimum school leaving age (at least 18 in ports); a specific risk assessment for anyone under 18; fitness to drive judged individually against the DVLA medical standards the employer has adopted.
Truck overturning and the operator being crushedOperatorsOperator restraint (seat belt) fitted and worn where the truck has one — required on counterbalanced, rough-terrain and side-loading trucks since 2002; retrofit on older trucks where the assessment shows an overturn and trapping risk.
People lifted in a cage on the forksPerson in the cage, operatorNon-integrated working platforms used only for occasional unplanned, exceptional work as set out in HSE guidance PM28; planned work at height (stocktaking, maintenance, cleaning light fittings) done from a MEWP instead.
Pedestrians struck by a moving truckPedestrians, other workersSeparate routes for people and trucks where possible; marked crossing points; trained drivers supervised; visitors kept out of truck areas.
Unstable or falling loadsOperators, people nearbyLoads within the truck's rated capacity, secured and carried low; racking and stacks inspected; nobody stands under a raised load.

Method statement — sequence of work

  1. Operators' training certificates checked and recorded; anyone without proof assessed and re-tested before being allowed to drive.
  2. Pre-use truck check at the start of each shift; restraint system present and working; defects reported and the truck taken out of use where needed.
  3. Traffic routes, pedestrian zones and loading areas marked; supervisors monitor driving and act on unsafe practice.
  4. Re-assessment arranged after incidents, long breaks or changes to the work; cages kept for exceptional unplanned use only and a MEWP hired for planned work at height.

What to include in the written assessment

Running a yard or warehouse also means paying for bookkeeping and year-end accounts, and a guide to how much an accountant costs helps when comparing quotes.

Get the document

Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.

Questions

Is refresher forklift training a legal requirement?

HSE says there is no specific requirement for refresher training at set intervals, but trained operators still need re-assessing from time to time — for example after an accident, a long break, or a change in the work.

Do forklift drivers have to wear a seat belt?

Where a restraining system is fitted it should be used. HSE notes that counterbalanced, rough-terrain and side-loading trucks have had to be fitted with one since 2002, and older trucks should have one fitted where there is a risk of overturning and trapping.

Need the finished document, not just the guide?

Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.

Build my RAMS — £19

Also as editable Word files, £9 each: Method statement template · Health and safety policy template.