The Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR) apply to employers and the self-employed wherever a substance could cause harm through fire, explosion or corrosion of metal — and HSE's point is that such substances are found in nearly all workplaces, from solvents and paints to LPG, pressurised gases and the dust from machining, sanding or handling foodstuffs. A DSEAR risk assessment finds out what is there and what risks it creates, removes or controls them, classifies the places where an explosive atmosphere could form, and plans for what happens if something goes wrong. This page follows HSE's summary of the Regulations.
Based on HSE — The Dangerous Substances and Explosive Atmospheres Regulations 2002, read 2026-10-31. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.
Hazards and controls
| Hazard | Who is at risk | Controls |
|---|---|---|
| Dangerous substances not identified | Employees, the self-employed, the public | Every substance on the premises checked against HSE's examples — solvents, paints and varnishes, flammable gases such as LPG, dusts from machining and sanding, dusts from foodstuffs, pressurised gases, substances corrosive to metal — and the risks it creates recorded. |
| Fire or explosion from a substance that could be removed | Everyone on the premises | The risk removed where possible, for example by a non-flammable alternative or a different process, before any control is relied on. |
| Fire or explosion where the substance has to stay | Everyone on the premises | Controls put in place to reduce the risk, and further controls to reduce the effects of an incident if one happens. |
| Explosive atmosphere in an unclassified area | Everyone on the premises | Areas where an explosive atmosphere may occur identified and classified, as DSEAR requires. |
| Ignition source in a classified area | Everyone on the premises | Ignition sources — HSE's example is unprotected equipment — avoided in the classified areas. |
| No plan for an accident, incident or emergency | Everyone on the premises, emergency services | Plans and procedures prepared to deal with accidents, incidents and emergencies involving dangerous substances. |
| Employees unaware of the risks | Employees | Employees given the information and training they need to control or deal with the risks from the dangerous substances. |
Method statement — sequence of work
- Dangerous substances listed from stores, process areas, vehicles and waste, with the fire, explosion or corrosion risk each creates.
- Each risk removed where possible; where not, controls set to reduce it and to limit the effects of any incident.
- Areas where explosive atmospheres may occur identified and classified; ignition sources, including unprotected equipment, kept out of them.
- Accident, incident and emergency plans and procedures written; employees informed and trained; the assessment reviewed when substances, processes or the layout change.
What to include in the written assessment
- Site address, the task, the date and who carried out the assessment.
- Each hazard above with the people at risk, the controls in place and the residual risk rating.
- The equipment, PPE and competence (training, cards) the controls depend on.
- Emergency and rescue arrangements, first aid and the nearest A&E.
- A review date and a signature line for the person in charge and the operatives who have read it.
Owner-directors of a workshop or spray shop often ask the same question each spring, and a guide to salary versus dividends for 2026/27 explains how each is taxed.
Get the document
Download the free DSEAR risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.
Questions
Who does DSEAR apply to?
HSE says the Regulations apply to employers and the self-employed, and they also protect members of the public who may be put at risk by the work activity.
What counts as a dangerous substance under DSEAR?
Any substance used or present at work that could, if not properly controlled, cause harm to people through fire, explosion or corrosion of metal. HSE's examples include solvents, paints and varnishes, flammable gases such as LPG, dusts from machining, sanding and foodstuffs, pressurised gases and substances corrosive to metal.
Need the finished document, not just the guide?
Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.
Build my RAMS — £19Also as editable Word files, £9 each: Method statement template · Health and safety policy template.