Dust risk assessment

Construction dust is not just a nuisance. HSE estimates that silica may be responsible for the deaths of over 500 people each year who have worked in construction, and the lung damage usually builds up over years before anyone notices. Under the Control of Substances Hazardous to Health (COSHH) Regulations, a dust risk assessment has to show how the dust is reduced at source, how it is stopped from getting into the air, and only then which mask backs that up.

Based on HSE — Construction dust: frequently asked questions, read 2026-10-19. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.

Hazards and controls

HazardWho is at riskControls
Silica dust from cutting, drilling and grinding concrete, brick, block and stoneOperatives, others nearbyPlan to make less dust: the right size of materials so less cutting is needed, a block splitter instead of a cut-off saw, or a different method such as direct fastening with a nail gun instead of drilling.
Dust from high-energy tools (cut-off saws, grinders, wall chasers)OperativesStop the dust getting into the air: water suppression with enough water for the whole time the work is done (wetting the ground first does not work), or on-tool vacuum extraction.
Wood dust from hardwood, softwood and MDFJoiners, carpentersExtraction on saws and sanders; RPE for powered cross-cut saws and sanders on hardwood, red cedar or MDF, and for sanding softwood in an enclosed space.
Dust escaping despite water or extractionOperativesRPE as well for high-risk tasks — FFP3 is the most advisable type for work that creates high dust levels or involves silica or wood dust; never reliance on a mask alone for high-risk tasks.
Masks that do not sealOperativesEvery tight-fitting mask face-fit tested to the wearer; worn correctly and changed before the filter clogs.
Dry sweeping and enclosed areasOperatives, other tradesVacuuming or wet brushing instead of dry sweeping; extra care in enclosed spaces where dust builds up; others kept away from the dust until the air has cleared.
Dust reaching the public and other tradesPublic, other tradesWork positioned so the dust cloud and wind are not directed at others; the public kept away from the work while it is going on.

Method statement — sequence of work

  1. Dusty tasks listed for the job (cutting, chasing, grinding, drilling, sanding, sweeping) and the material type recorded — silica, non-silica or wood.
  2. Each task redesigned where possible to make less dust; water or on-tool extraction specified for what remains, with the right extractor class for the dust.
  3. FFP3 or other suitable RPE issued to face-fit-tested wearers for high-risk tasks; supervisors check controls are used every time, including short jobs.
  4. Clean-up by vacuum or wet methods; controls reviewed if visible dust escapes or a worker reports that the controls are not being used.

What to include in the written assessment

If you have just started working for yourself on site, it is worth reading up on whether you need to do a self assessment tax return before the first deadline comes round.

Get the document

Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.

Questions

Is a mask enough for cutting concrete?

No. HSE says a mask alone is not enough for high-risk tasks: high-dust work can overwhelm it, filters clog, and it only protects the wearer. Water or on-tool extraction comes first, with an FFP3 mask as well.

Am I safe from dust if I work outside or only for a few minutes?

No to both. HSE points out that outdoors you are still close to where the tool makes the dust, and that quick dusty tasks repeated through the day add up over the years.

Need the finished document, not just the guide?

Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.

Build my RAMS — £19

Also as editable Word files, £9 each: Method statement template · Health and safety policy template.