This page is for tradespeople, site managers and small business owners who want a clear starting point for assessing slip and trip risks. HSE's employer guidance treats the subject as a risk assessment problem, working through a hierarchy of controls and favouring simple, low-cost measures where they work. It notes that a smooth, clean, dry floor is rarely a slip risk. The sections below set out common hazards, the controls HSE describes, and a short method. Treat it as a draft to adapt to your own premises, work activities and the people who use them.
Based on HSE — Employer, read 2026-11-12. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.
Hazards and controls
| Hazard | Who is at risk | Controls |
|---|---|---|
| Floor contamination such as fluids, swarf, sawdust, food and drink | Employees, contractors and visitors walking through the affected area | HSE puts preventing contamination reaching the floor first: review the work activity, fix leaking machines, and use drip trays. Where spills still happen, encourage a 'see it sort it' attitude and set timely cleaning regimes. |
| Rainwater and weather brought in at entrances | Anyone entering the building, especially visitors and delivery staff | Stop rainwater entering where possible, for example with canopies over entrances. Mats at entrances help control what is carried in. Cleaning regimes then deal with any water that still reaches the floor. |
| Ice, condensation and humidity | Workers outdoors, in cold stores or in damp areas, and visitors crossing them | HSE lists these among adverse environmental conditions to eliminate or manage. Check for condensation and humidity, manage ice in winter and in cold stores, and keep rainwater out so floors stay dry underfoot. |
| Poor lighting | Everyone using walkways and stairs, particularly visitors unfamiliar with the layout | Lighting is part of checking the environment. Poor lighting hides contamination and obstructions, so walkways, stairs and entrances are checked for adequate lighting and kept maintained as part of regular inspection. |
| Trailing wires and obstructions on walkways | Employees, cleaners, contractors and visitors | HSE asks whether walkways are kept clear of wires and obstructions, with enough bins and storage provided. Routing cables away from walking routes and tidying as work proceeds supports good housekeeping. |
| Unsuitable, worn or damaged floors, stairs and handrails | All floor users, including people carrying loads or less steady on their feet | The Workplace (Health, Safety and Welfare) Regulations 1992 expect floors to be suitable and in good condition. Check floors, stairs, handrails, nosings and lighting are maintained. Better cleaning is tried first, and replacing the floor is usually a last resort. |
| Rushing, carrying loads and distractions | Employees, plus vulnerable people and visitors | HSE suggests reviewing tasks that affect safe walking, such as carrying loads or rushing. Consider who uses the area, including visitors and vulnerable people, and whether the work layout invites hurried or distracted movement. |
Method statement — sequence of work
- Walk the premises or site and note where people walk, then list the contamination, obstruction, lighting, floor and weather problems you find, speaking to employees about problem areas.
- Work down HSE's hierarchy: prevent contamination reaching the floor, then control it, then address environmental conditions, floor condition and, where relevant, footwear.
- Record what is done, who looks after each area (including cleaning and contract staff), and keep records of cleaning and maintenance.
- Monitor and review: gather employee feedback on whether the measures work, and revisit the assessment after any incident or change in work activity.
What to include in the written assessment
- Site address, the task, the date and who carried out the assessment.
- Each hazard above with the people at risk, the controls in place and the residual risk rating.
- The equipment, PPE and competence (training, cards) the controls depend on.
- Emergency and rescue arrangements, first aid and the nearest A&E.
- A review date and a signature line for the person in charge and the operatives who have read it.
Alongside site safety, self-employed tradespeople also keep their own records and tax in order, and it helps to understand who needs to do a Self Assessment as a general matter.
Get the document
Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.
Questions
What does HSE say about slips and trips risk assessment?
HSE's employer guidance says slip and trip risks need a risk assessment, using a hierarchy of controls. It points to the Management of Health and Safety at Work Regulations 1999, and to focusing on risks with the potential to cause harm. Simple, low-cost measures are used where they work, rather than complicated solutions.
Which control measures does HSE list first for slips?
HSE starts with preventing contamination reaching the floor, for example by fixing leaking machines or fitting canopies over entrances. Next comes controlling contamination with cleaning regimes, drip trays and entrance mats, then environmental conditions, floor condition and footwear. Replacing a floor is usually described as a last resort.
Need the finished document, not just the guide?
Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.
Build my RAMS — £19Also as editable Word files, £9 each: Method statement template · Health and safety policy template.