Painting risk assessment

For a painter and decorator the hazardous substance is in the tin. HSE's solvents guidance explains that paints, thinners, strippers and glues give off vapour as they are applied, dry and cure, and that some solvents also get in through the skin. The Control of Substances Hazardous to Health (COSHH) Regulations require you to protect against that. This page follows HSE's Assess, Control and Review model for solvents, and adds the work-at-height and old-paint hazards that every decorating job brings.

Based on HSE — Construction hazardous substances: Solvents, read 2026-10-19. This page is a starting point you must adapt to your own site, people, equipment and the client's rules. It is not a substitute for an assessment by a competent person.

Hazards and controls

HazardWho is at riskControls
Breathing solvent vapour (headaches, dizziness, longer-term organ damage)Decorators, occupantsWater-based or low-solvent products where possible; the minimum amount used, lids kept on, solvent-soaked rags in sealed containers; ventilation always — fresh air for lower-risk products, mechanical ventilation or LEV where it is not enough.
Spraying in enclosed spacesSprayers, others nearbyBrush or roller instead of spray where practicable; non-essential people kept away until mist and vapour clear; RPE with the right gas/vapour filter (particulate filters do not stop solvent vapour), wearers fit tested, filters changed at suitable intervals.
Paint strippers containing dichloromethane (DCM)DecoratorsUse of DCM-based stripper at work only by a competent person who has passed HSE's DCM competence training scheme; effective, usually mechanical, ventilation; supplied-air breathing apparatus for anything beyond very short tasks.
Skin and eye contact (dermatitis, burns, irritation)DecoratorsGloves right for the product (single-use nitrile for many solvents, not for DCM); eye protection compatible with the RPE; disposable overalls; never solvents to clean skin; good washing facilities.
Falls from ladders, steps and platformsDecoratorsTowers or podiums for longer work; ladders only for short, low-risk tasks, secured and not overreached; stepladders not worked from the top steps.
Disturbing old lead paintDecorators, occupants, childrenOlder paintwork assumed to contain lead until tested; no dry sanding or burning off; wet abrasion or chemical stripping with dust controlled and cleaned up by vacuum; washing before eating, drinking or smoking.
Fire from flammable solventsDecorators, occupantsFlammable products stored away from ignition sources in the smallest practical quantity; no smoking; contaminated rags removed from the building at the end of the day.

Method statement — sequence of work

  1. Products for the job listed with their safety data sheets; solvent content, spraying or brushing and the room size recorded to judge the risk.
  2. Lower-solvent alternatives chosen; ventilation arranged and occupants told which rooms to avoid; RPE and gloves selected for the specific products.
  3. Access equipment chosen for each area; old paintwork tested or treated as lead before preparation starts.
  4. Containers closed and waste removed daily; skin checked for signs of dermatitis and health surveillance carried out where there is a reasonable likelihood of it.

What to include in the written assessment

Decorators who are starting to take on bigger commercial jobs often look at the pros and cons of a sole trader or limited company as their turnover grows.

Get the document

Download the free risk assessment template (Word) and fill in the table above for your job, or have the RAMS generator produce a completed risk assessment and method statement for this trade in Word for £19.

Questions

Is a dust mask enough for spraying paint?

No. HSE notes that particulate filters protect against spray mist but not solvent vapour — you need the right gas/vapour filter, changed at suitable intervals, and the wearer must be fit tested.

Can I use a DCM paint stripper on a job?

Only a competent person who has completed and passed HSE's DCM competence training scheme may use one at work. Otherwise choose a different stripper or method.

Need the finished document, not just the guide?

Answer a few questions about the job and get a completed RAMS in Word, ready to send — £19 including VAT, supplied straight after payment.

Build my RAMS — £19

Also as editable Word files, £9 each: Method statement template · Health and safety policy template.