All templates

Free PUWER risk assessment template and inspection checklist (Word)

For any machine, power tool or piece of work equipment. The template takes you through the Provision and Use of Work Equipment Regulations 1998 (PUWER) one regulation at a time, then records the actions, inspections, maintenance and who is trained to use it.

Download the PUWER template (.docx)

  • Word document (.docx)
  • 3 A4 pages
  • Free for your own business
First page of the puwer risk assessment template in Word

Disclaimer: this template is a starting point only. You are responsible for assessing the risks of your own work, and for making sure any document you produce from it is suitable and sufficient for the task, the site and the people involved. It is not health and safety advice.

For the full guide to what PUWER requires, read PUWER risk assessment: a step-by-step guide.

What's in the template

  1. Equipment details — what it is, where it is, who uses it
  2. PUWER checklist — 17 checks, each tied to its regulation
  3. Risk rating — before and after actions, on a 5 × 5 scale
  4. Action plan — every "no" from the checklist, with a name and a date
  5. Inspection record
  6. Maintenance log
  7. Authorised and trained users
  8. Briefing record — sign-off sheet

The checklist, regulation by regulation

RegulationWhat you are checking
Reg 4The equipment is suitable for the job, the place and the people
Reg 5It is maintained in good working order, with a log where it has one
Reg 6It is inspected where safety depends on how it's installed or it can deteriorate
Reg 7Use is restricted to designated people where there is a specific risk
Regs 8–9Users have the information, instructions and training they need
Reg 10It meets the product safety requirements that applied when it was supplied
Reg 11Dangerous parts are guarded
Regs 12–13Protection against specified hazards and hot or very cold parts
Regs 14–18Start, stop and emergency stop controls work and are marked
Reg 19It can be isolated from its energy sources
Regs 20–21It is stable, and the lighting is good enough
Reg 22Maintenance can be done safely
Regs 23–24It carries the markings and warnings it needs

Inspection or maintenance?

They are different duties. Maintenance (regulation 5) keeps equipment working safely — servicing, repairs, replacing worn parts. Inspection (regulation 6) is a check by a competent person to find deterioration before it becomes dangerous, and applies where safety depends on how the equipment is installed or where it is exposed to conditions that can make it deteriorate. Record both: sections 5 and 6 of the template are for exactly that.

Lifting equipment has its own extra rules under LOLER. For lifts, use the lifting plan template.

Working on someone else's site? The principal contractor will usually want a RAMS. Build a completed RAMS in Word, £19 including VAT.

Five or more employees? The law also requires a written health and safety policy. Ours is ready to edit, with the statement already written: health and safety policy, £9 including VAT.

More templates